This may seem a little complicated, but never fear! The table below breaks down the information you’ll be looking for to replace the brackets.

If you don’t have one of these types of cameras, you could still try inputting your information in these formats, but you may need to reach out to your distributor for more help. Here we are going to look at the RTSP for the different lines of cameras we have at Nelly’s. Once you have your RTSP port, you’re ready to find your RTSP address which you’ll use to pull your video streams wherever you need to.Įvery camera is going to have a unique RTSP address and the format is going to vary between different types of cameras. This should be the default setting, but it doesn’t hurt to check before you get going! Not every system is going to look the exact same, so the instructions for navigating the menu may vary, but these general principles should apply. Check Out Our RTSP Feed URL Generator! RTSP for Each Camera Lineīefore you have your RTSP address entered, you’re going to go into the web interface for the camera you’re going to be streaming and go to “Set Up”, “Network”, and then “Port.” You need to make sure your RTSP Port is set to 554. If you’re here from our post on Live Streaming Your IP and HD-TVI Security Cameras with OBS, you’ll know one way we use RTSP is to live stream cameras around our office in our Facebook dealer group! Getting the RTSP address to live stream is a super useful application, and this post will help you get that information. You can think of it as a handshake between the camera and whatever device is pulling the RTSP stream.

Its primary uses are to pull a video feed from a camera to an NVR, viewing software, or even home automation solutions. RTSP allows you to pull a live video stream from your camera and view it from different devices and programs.

RTSP stands for Real Time Streaming Protocol.

How to find client port for lorex 13